Skip to main content

Prices and stock in the new screens

Set catalog and storefront prices, sales and stock, and see why a storefront got the price or quantity it did.

Written by Matthew Thomas

The new screens show a product's prices and stock in two places. The product's Pricing and Inventory views hold the catalog figures that every storefront starts from. Each storefront's Price and Inventory tabs show what that storefront actually gets, and why. A storefront is one connected sales channel account, such as "Amazon US".

To open them, open a product's panel and click Pricing or Inventory, or click a storefront and pick its tab. See How to open a product and use the product panel.

The Pricing view

Catalog prices

Catalog prices are the prices "Storefronts without their own price get these". They are Item price, Cost, Min price and Max price. Each shows where it came from, such as "Set by the repricer" with a time, "SMART Type default", or "Shared by all N sizes". A SMART Type is the product type you give a product in Zentail, and it can supply defaults.

Prices are checked before they save: "Enter a price, like 19.99.", "Price can't be negative." and "Min price can't be above max price." A failed save says "Not saved:" and the reason.

If the repricer runs on some storefronts, a note says "The repricer can change this on <storefronts>." If someone else changed a price after you opened it, Zentail keeps their price and says "Someone else changed this to “<price>” since you opened it. Your edit wasn't saved." The other prices you edited at the same time don't save either: "Not saved: another price changed first."

The catalog sale

The Scheduled sale section sets the catalog sale. It shows the sale price, its dates and the struck-through price, or "No sale scheduled."

  1. Click Add a sale (or Change sale).

  2. Enter the Sale price. The Price during sale box is optional and is shown struck through.

  3. Set Starts and Ends. Leave Ends blank to run the sale until you remove it.

  4. Click Save sale.

Remove sale takes it off. Storefronts with their own sale keep theirs. After a save you see "Saved. Storefronts without their own sale get it with their next price send." The sale price must be below the price sent: "The sale price must be below $19.99." When a group shares the sale, the buttons read "Change all 6 sizes" and "Remove from all 6 sizes", and the sale must be below the cheapest variant's price.

Price on each storefront

The table lists each storefront with its Price and any Override, meaning a price set for that storefront only. Listed storefronts come first. The others are behind Set a price for an unlisted storefront (N) ›. A price that isn't sent says why, for example "Not sent · pricing off" or "Not sent · not listed here".

Before you save

Before a price change saves, a table shows each storefront it reaches, with the price now and after. In a product group it offers Change all N sizes (or colors, or variants). A product group is a set of variants sold under one parent.

Prices across a product group

The Pricing view can show the whole group side by side, such as "Prices for every size". It says how the group is priced: "One price for all N variants", "Each variant priced separately", or "Some prices shared across variants". Group pricing settings changes this.

If a group shares one item price but its Amazon sizes carry different prices, the Pricing view warns "Item price isn't following Amazon". It says Zentail has stopped copying Amazon prices into the group since a date, so your other channels keep the current item price, and with more than one Amazon storefront it lists each storefront's price. To follow Amazon's price for each size, click Open Group pricing settings and price each one separately. To keep one price, turn off "Regularly pull pricing into Zentail" on the Amazon storefront.

The storefront Price tab

The Price tab shows one storefront's price.

  • Pricing sets whether Zentail sends price to this storefront. See Sending settings.

  • The price card shows the price sent. An Override badge and "Set on this SKU · catalog is $X" mean this storefront has its own price. Edit the storefront's own price here.

  • On Amazon, the card also shows the FBA price and the Buy Box, with "Lowest landed".

  • Price submission shows where the latest price change is. Until it goes live you see "<storefront> still shows $X until this goes live".

The repricer

Saving your own price on a storefront stops the repricer there. The tab warns you first: "Saving your own price stops the repricer on <storefront>." To let the repricer work again, remove the storefront's own price.

A sale on one storefront

  1. On the Price tab, click Add a sale for <storefront>.

  2. Enter the Sale price. The Price during sale box is optional.

  3. Set Starts and Ends. Leave Ends blank to run the sale until you remove it.

  4. Click Save sale.

Use Change sale or Remove sale later. The Ignore catalog sales checkbox stops catalog-wide sales applying on this storefront. The storefront then gets only a sale set here.

On Walmart:

  • The tab shows "Sale type: Reduced", and Walmart's answer, such as "Waiting for Walmart…" or "Walmart accepted this sale on…".

  • A sale that starts within 30 minutes starts an hour from now instead.

  • Walmart keeps a sale it already has until its end date. Removing the sale in Zentail doesn't end it on Walmart yet.

Price sent and why

Price sent and why is a step-by-step table of how Zentail reached the price it sent: the catalog price, any override, whether price was withheld, any sale, and the price sent. Each step links to where you change it: Edit in Pricing for the catalog price, and for a catalog sale (it opens the Scheduled sale section), or Edit price and Edit sale on this tab.

The Inventory view

The product's Inventory view shows stock in each warehouse and a total.

  1. Change a warehouse's count. It must be a whole number, 0 or more.

  2. Click Save stock.

Some rows are locked:

  • "Managed by <integration>" means a connected inventory system sets that warehouse's stock.

  • "Managed by <SKU>" means the product is an alias or kit, so its stock comes from another SKU.

A kit shows "From its parts", which is locked, and "Built kits", which you can set. On an archived product the view warns "This SKU is archived, so every storefront gets 0. Setting stock above 0 here unarchives it." A product group can show "Stock for every size".

A Bin column after Stock shows each warehouse's bin. To change one, edit it and click Save stock. The bin saves first, then the stock. A bin can't be left blank: "Enter a bin. A bin can't be cleared here." A kit has no Bin column. If a SKU is in more than one bin in a warehouse, the bins are read-only, with a lock that says "This SKU is in more than one bin here. Saving a bin would move all of its stock into one, so these bins are read-only."

The storefront Inventory tab

The Inventory tab holds two settings for this storefront: Inventory (whether Zentail sends stock) and Max listed quantity. Max listed quantity caps the quantity Zentail sends. Enter a number, or choose No cap.

Quantity sent and why shows how Zentail reached the quantity it sent: Warehouses, Buffer, Archived or Shelved, the Max listed quantity cap, Prefer FBA, stock the channel holds, and Sent. Each step has a link to fix it: Edit stock, Edit setting, Account settings, Warehouse settings or Storefront settings.

Frequently asked questions

Why is the price on Amazon different from my catalog price?
Open Amazon's Price tab and read Price sent and why. It shows each step, such as an override, a sale or a withheld price.

How do I set a sale for all storefronts?
In the product's Pricing view, open Scheduled sale, click Add a sale, set the sale price and dates, then click Save sale. Storefronts with their own sale keep theirs.

How do I set a sale for one storefront only?
On that storefront's Price tab, click Add a sale for <storefront>, set the sale price, start and end, then click Save sale.

Why did the repricer stop?
Saving your own price on a storefront stops the repricer there. Remove that storefront's own price to let it reprice again.

How do I change stock?
In the panel, click Inventory, change a warehouse's count and click Save stock. Locked rows are managed by an integration, a kit or an alias.

How do I stop sending price or stock to one storefront for a SKU?
Set Pricing on the Price tab, or Inventory on the Inventory tab, to Off.

I have stock, so why does the channel show 0?
Open the storefront's Inventory tab and read Quantity sent and why. A Shelved or archived SKU, a buffer or a cap can each bring it down.

I removed my Walmart sale but Walmart still shows it. Why?
Walmart keeps a sale it already has until its end date.

Did this answer your question?