Skip to main content

How to edit catalog data in the Catalog view

Edit a product's catalog values in place, and read shared values, SMART Type defaults and error marks.

Written by Matthew Thomas

The Catalog view shows every catalog attribute of one product, grouped into cards, and lets you edit each value where it sits. A catalog value goes to every storefront that sells the product, unless that storefront has its own override. A storefront is one connected sales channel account, such as "Amazon US". An override is a value set for one storefront that replaces the catalog value there.

To open the Catalog view, open a product's panel and click Catalog, or one of the sections under it. See How to open a product and use the product panel.

The cards

The cards appear in this order:

  1. Descriptors. What you write about the product: SMART Type, Title, Variant title, Bullet points, Description and Tags. A SMART Type is the product type you give a product in Zentail. Variant title is built for you: "Made from the title and this variant's options. Edit the title to change it."

  2. Identifiers. UPC, EAN, GTIN and similar product codes.

  3. Required by your channels. Attributes at least one of this product's storefronts requires. Blank ones come first.

  4. Recommended by channels. Attributes a storefront recommends. Blank ones come first.

  5. Shipping, Compliance and Categorization.

  6. Used by your channels. Attributes a channel uses without requiring or recommending them, and that no Shipping, Compliance or Categorization card holds. This card is folded until you open it.

  7. Other attributes. Everything else. This card is folded until you open it.

How the cards behave:

  • Each attribute sits in one card only. If a channel requires it, it goes under Required, even if it is a shipping attribute. Images always stay in Images, and descriptors in Descriptors.

  • Each heading counts its attributes and the blank ones, such as "· 12 · 3 blank". A folded card counts the filled ones instead, such as "· 12 filled · 3 blank", and adds how many of its hidden rows have errors or warnings.

  • On a product group, a card folds the rows every variant shares under one line, such as "Shared with all 6 sizes · Show". See Values shared by the product group.

  • If a required attribute is a descriptor, the Required card says so: "N more in Descriptors, N of them blank".

  • While Zentail checks your channels you see "Checking what your channels need…". If the check fails, every attribute shows under Other attributes. If one storefront can't answer, a note names it and says Required and Recommended may be incomplete.

  • A blank value reads "Blank · add a value".

  • On a wide screen the cards sit in two columns.

Search inside a product

The search box at the top, "Search attributes by name or value", stays in view as you scroll. It finds attributes by name, by channel, or by value.

  • It shows how many attributes match, such as "4 attributes in 2 sections". Each card heading shows "· N of M match".

  • It searches the folded Used by your channels and Other attributes cards too.

  • It also finds catalog attributes this product doesn't hold yet. They show under Other attributes as blank rows you can fill in. When more than 50 match, you see "Showing the first N of M catalog attributes that match. Type more to narrow." If that search fails, a note says "Couldn't search every catalog attribute, so only this product's match."

  • Click Clear, or press Escape, to empty the box. A second Escape closes the panel.

Edit a value

  1. Click the value. An editor opens on that row.

  2. Change the value.

  3. Click Save. Cancel or Escape leaves it as it was.

If the save fails, you see "Not saved:" and the reason. If someone else changed the value after you opened the editor, Zentail doesn't overwrite it. The row shows what is stored now and says, for example, "Someone else changed this to “Blue” since you opened it. Your edit wasn't saved." Save again if you do mean to overwrite it. Prices are checked before they save: "Enter a price, like 19.99.", "Price can't be negative." and "Min price can't be above max price."

After a save, the product's errors, listing preview and storefront prices refresh. Channels re-check in the background, so the error list keeps checking every 15 seconds for 3 minutes.

On an ASIN or EasyList ASIN row, the editor has Search Amazon by UPC when the product has a UPC. It lists the matches, each with a View on Amazon link. Pick one to fill the value, then click Save.

Some rows can't be edited here. The row says why, for example "This attribute can't be edited.", "Your account has no column for this yet, so it can't be set here." or "Edit it in Quick Edit".

Pick a SMART Type

The SMART Type row leads the Descriptors card. Click it, type at least 2 letters in "Search SMART Types by name", pick a match from the list, and click Save. Only a type you picked from the list can be saved. Changing the SMART Type also changes this product's channel categories to the new type's defaults, unless you've set them yourself.

Pick categories by name

Channel category, product type and store category rows open the same kind of search. Type part of a name and pick a match, which shows its full path. Store categories (BigCommerce, Shopify and eBay store categories) keep your picks as chips you can remove. A channel category that has sub-categories is greyed out and says "Too general – pick one below it". A row that holds one value has a clear button, such as Clear category.

Format the Description

The Description row opens an editor with a formatting toolbar and an Editor mode switch, Visual or HTML.

  • In Visual, the toolbar sets the text style (Paragraph, Heading 2 or Heading 3) and gives bold, italic, underline, bulleted and numbered lists, links and Clear formatting.

  • HTML shows the stored HTML. The footer says "Saved as HTML." and counts characters.

  • If a description holds markup the Visual editor can't keep, it opens in HTML mode and says so. Switching it to Visual first warns "Switching to Visual removes … from this description." Click Stay in HTML or Switch to Visual.

Only the catalog Description, and the Description overrides for eBay, Shopify, BigCommerce and TikTok, use this editor. Amazon, Walmart and other channels keep a plain box.

Values shared by the product group

A product group is a set of variants, such as sizes or colors, sold under one parent. Some values are shared by every variant in the group.

  • A shared value has a stacked-boxes icon. Hover it to see who shares it, such as "Shared by all 6 sizes".

  • Changing a shared value changes it on every variant. Zentail asks first, lists the variants it changes, and says "Listings change on <storefronts>, and wherever else these variants are listed."

  • Tick Don't show this again to stop the question for shared values.

  • To edit all shared values together, click Group in the panel. The Shared values section there shows the same cards and editors for the shared rows only, and a change saves once for all the variants.

  • On a product group, a card folds its shared rows under "Shared with all 6 sizes · Show", with how many of them have errors or warnings. Click Show to open them, and Hide to fold them again. A blank row a channel requires or recommends never folds, and a search opens every fold.

Which values are shared is set in the group's settings. See Group settings.

Where a value came from

Values you set yourself have no label. A value from somewhere else has a line under it:

  • "From SMART Type default"

  • "From parent attribute"

  • "From repricer"

  • "Inferred"

  • "Set by Zentail"

Where a value goes

On the right of each row are the logos of the storefronts that ask for this attribute. Hover the row and the logos give way to a Where this goes button. Click it to see which storefronts get this value, and where a storefront's own override replaces it.

To change a value for one storefront only, use that storefront's Listing tab. See Catalog values and overrides.

SMART Type defaults

A SMART Type is the product type you give a product in Zentail. It decides which attributes each channel needs, and it can supply default values.

  • A value that comes from the default reads "From SMART Type default".

  • If the product has its own value in place of the default, the row shows "Overrides default <value>" and a Use <default> button. The ⓘ explains that changing the SMART Type won't change this product's own value.

  • Use <default> clears your own value, so the default applies again and follows any future change to the SMART Type. It doesn't type the default in as your value.

  • If the value is shared by the group, Zentail first asks "Use the SMART Type default?", because it changes every product in the group.

  • If the default doesn't come back, you see "Cleared, but the SMART Type default didn't come back. Set a value to fix it."

Error marks on storefront logos

When a storefront reports an error on an attribute, its logo on that row carries a badge. The badge is red for an error that blocks the listing, and amber for a warning.

  • Hover or focus the badge to read the error, such as "Walmart: error — …".

  • Click the badge to open the row's editor. On a row that can't be edited here, it opens that storefront's Errors tab.

  • When you hover a row, its error badges stay in view and the Where this goes button moves beside them.

  • Errors that no row can take are listed at the top of the view, under "Errors not on a field · N". Each line names its storefront and has See in Errors.

  • The folded Other attributes card says how many hidden rows have errors or warnings.

  • If the product is Shelved on a storefront, or archived, that storefront doesn't re-check product data or pricing. Its errors say "(not re-checked while this SKU is Shelved)" or "archived".

For the full list and how errors clear, see How to find and fix listing errors in the new screens.

Where Tags is

Tags, your keywords for channel search, is in the Descriptors card, after Description. If a channel requires Tags, the Required card counts it in its "N more in Descriptors" line.

Frequently asked questions

Where are the attributes my channels require?
In the Required by your channels card. Blank ones are listed first, with the logo of each storefront that asks for them.

How do I find one attribute quickly?
Type its name or value in "Search attributes by name or value" at the top of the Catalog view.

How do I edit a value?
Click the value, change it, and click Save. Escape cancels.

Why did it warn that my change affects all variants?
The value is shared by the product group, shown by the stacked-boxes icon, so changing it changes every variant.

What does "From SMART Type default" mean?
The value comes from the product's SMART Type default, not from a value you set.

What does "Overrides default" mean?
The product's own value replaces the SMART Type default. Click Use <default> to follow the default again.

How do I change a product's SMART Type?
Click the SMART Type row at the top of the Descriptors card, search for the type by name, pick it and click Save.

How do I format a description?
Click the Description row and use the toolbar in Visual mode, or switch to HTML to edit the markup.

Where are Tags in the new screens?
In the Descriptors card, after Description.

Why can't I edit an attribute here?
The row says why. Some attributes are set only in Quick Edit, and some are set by Zentail.

Did this answer your question?