When managing products that are in a clothing set category for Target Plus (ie Bottom Sets or Swimwear Sets), you may need to manage the different 'pieces' of your product with different information. This requires special consideration for managing these attributes. A common example may be someone selling pajama sets where the pattern for 'piece 1' (the top) is different from the pattern for 'piece 2' (the pants).
Use this article to learn about how to manage these attributes for each category.
When your data for the multiple pieces is exactly the same, you likely do not need to take any special action. Otherwise, you're likely going to use the Target Plus attribute override to manage the data for each piece individually.
Some item types for Target are designed to present information about multiple pieces of clothing being sold together on one listing. Because it is possible that the different items of clothing have different patterns, fabric types, product types etc, special consideration should be made when filling out attributes, and attribute overrides might need to be used to present all information fully.
Jump to each clothing set item type to learn more about the requirements for that item type.
Apparel Accessories Sets
Fabric Type
Fabric Type is required for this item type. If the fabric type of both of the pieces in this set are the same, then you should follow the instructions in this article to manage the Fabric Type attribute.
If the fabric type is different per piece, then you should fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 8 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
Closure Type
Closure type is not a required attribute, however, you can choose to fill it out to improve the quality of your listing. If the closure types for both pieces are the same then you can fill out just the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the below table.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Buckle |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Clip |
Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Length
Length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
piece 1 length | This should be a numeric value that represents the length of this item in inches | 10 |
piece 2 length | This should be a numeric value that represents the length of this item in inches | 12 |
Width
Width is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
piece 1 width | This should be a numeric value that represents the width of this item in inches | 3 |
piece 2 width | This should be a numeric value that represents the width of this item in inches | 2 |
Piece 3
Information about a third piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 95 |
Piece 3 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 3 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 3 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Recycled Spandex |
Piece 3 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
piece 3 length | This should be a numeric value that represents the length of this item in inches | 12 |
piece 3 width | This should be a numeric value that represents the width of this item in inches | 1 |
Athletic Wear Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 10 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 12 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two leggings) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example a shirt and a short) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | If you are selling a bottom and a top, Piece 1 should be the bottom. You can find the valid values for attribute on the valid value sheet download | Athletic Legging |
Piece 2 apparel type | If you are selling a bottom and a top, Piece 2 should be the top. You can find the valid values for attribute on the valid value sheet download | Athletic Tank Top |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces is the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Fly Zipper |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Pullover |
**Leg Length Type
Leg Length Type is a required attribute for this item type, specifically for piece 1 of the set. If both pieces are tops, or you want to send leg length type for the piece 2 then you should use an override according to the table below.
Target Attribute | Note | Example |
Piece 1 garment length | The valid values for tops for this attribute are: "At Midriff", "At Thigh", "At Waist", "Below Hip", "Below Waist", "Classic", "Crop", "Full", "Just Above Waist". The valid values for bottoms can be found via the valid values download | Below Waist |
Piece 2 garment length | Must be filled out via an override to send. The valid values for leg length type or the above top valid values can be used. | Ankle |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Sleeve Length
Sleeve Length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 sleeve length | Contact Zentail support for full list of valid values | Cap Sleeve |
Piece 2 sleeve length | Contact Zentail support for full list of valid values | Short Sleeve |
Bottom Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 8 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two leggings) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example a pant and shorts) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | You can find the valid values for attribute on the valid value sheet download | Shorts |
Piece 2 apparel type | You can find the valid values for attribute on the valid value sheet download | Jogger Pant |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces is the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Pull-On |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Front Drawstring |
**Leg Length Type
Leg Length Type is a required attribute for this item type. If the leg length type for both pieces is the same then you can just fill out the Leg Length Type attribute in Zentail. If they are different then you need to use an override.
NOTE TO DELETE BEFORE PUBLISHING: the valid values on the download are actually only going to be our Zentail / catalog attribute valid values. The valid values for the override are:
["Above Knee", "Ankle", "At Calf", "At Hip", "At Knee", "At Midriff", "At Thigh", "At Waist", "Below Hip", "Below Knee", "Below Waist", "Classic", "Crop", "Full", "Just Above Waist", "Short"]
If we put that here we will need to update this article frequently. Ideally our valid value download should also give an idea of what select values are valid for the listing attribute override.
Target Attribute | Note | Example |
Piece 1 garment length | You can find the valid values for attribute on the valid value sheet download | Below Waist |
Piece 2 garment length | You can find the valid values for attribute on the valid value sheet download | Ankle |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Coordinate Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 1 apparel material 4 | This should be one of the valid fabric type values (from the valid value sheet) | Polyester |
Piece 1 apparel material 4 percentage | This should be a number that corresponds to the percentage of the above material | 1 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 2 apparel material 4 | This should be one of the valid fabric type values (from the valid value sheet) | Polyester |
Piece 2 apparel material 4 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two A line dresses) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example a chino pant and a halter top) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | If you are selling a bottom and a top, Piece 1 should be the bottom. You can find the valid values for attribute on the valid value sheet download | Chino Pant |
Piece 2 apparel type | If you are selling a bottom and a top, Piece 2 should be the top. You can find the valid values for attribute on the valid value sheet download | Peasant Top |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces is the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Fly Zipper |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Front Full Length Zipper |
**Leg Length Type
Leg Length Type is a required attribute for this item type, specifically for piece 1 of the set. If both pieces are tops, or you want to send leg length type for the piece 2 then you should use an override according to the table below.
Target Attribute | Note | Example |
Piece 1 garment length | The valid values for tops for this attribute are: "At Midriff", "At Thigh", "At Waist", "Below Hip", "Below Waist", "Classic", "Crop", "Full", "Just Above Waist". The valid values for bottoms can be found via the valid values download | Below Waist |
Piece 2 garment length | Must be filled out via an override to send. The valid values for leg length type or the above top valid values can be used. | Ankle |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Product Size
Product size is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 Product Size | Contact Zentail support for full list of valid values | One Size Fits Most |
Piece 2 Product Size | Contact Zentail support for full list of valid values | XXXL Tall |
Sleeve Length
Sleeve length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 sleeve length | Contact Zentail support for full list of valid values | Cap Sleeve |
Piece 2 sleeve length | Contact Zentail support for full list of valid values | Short Sleeve |
Piece 3
Information about a third piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 95 |
Piece 3 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 3 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 3 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Recycled Spandex |
Piece 3 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 3 apparel type | You can find the valid values for this attribute on the valid value sheet download under Product Type | Circle Skirt |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
Piece 3 garment length | Contact Zentail support for full list of valid values | Above Knee |
Piece 3 sleeve length | Contact Zentail support for full list of valid values | Long Sleeve |
Hat and Glove Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 1 apparel material 4 | This should be one of the valid fabric type values (from the valid value sheet) | Polyester |
Piece 1 apparel material 4 percentage | This should be a number that corresponds to the percentage of the above material | 1 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 2 apparel material 4 | This should be one of the valid fabric type values (from the valid value sheet) | Polyester |
Piece 2 apparel material 4 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Closure Type
Closure type is not a required attribute, however you can choose to fill it out if you like. If the closure types for both pieces is the same then you can just fill out the closure type attribute in Zentail. If they are different per-piece then you need to use overrides according to the below table.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Clasp |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Velcro |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Piece 3
Information about a third piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 100 |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
One Piece Clothing Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 1 apparel material 4 | This should be one of the valid fabric type values (from the valid value sheet) | Polyester |
Piece 1 apparel material 4 percentage | This should be a number that corresponds to the percentage of the above material | 1 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 2 apparel material 4 | This should be one of the valid fabric type values (from the valid value sheet) | Polyester |
Piece 2 apparel material 4 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two t-shirts) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example an A-line dress and a cardigan sweater) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | You can find the valid values for attribute on the valid value sheet download | A Line Dress |
Piece 2 apparel type | You can find the valid values for attribute on the valid value sheet download | Cardigan Sweater |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces is the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Fly Zipper |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Front Full Length Zipper |
**Leg Length Type
Leg Length Type is a required attribute for this item type. If the leg length type for both pieces is the same then you can just fill out the Leg Length Type attribute in Zentail. If they are different then you need to use an override.
NOTE TO DELETE BEFORE PUBLISHING: the valid values on the download are actually only going to be our Zentail / catalog attribute valid values. The valid values for the override are:
["Above Knee", "Ankle", "At Calf", "At Hip", "At Knee", "At Midriff", "At Thigh", "At Waist", "Below Hip", "Below Knee", "Below Waist", "Classic", "Crop", "Full", "Just Above Waist", "Mini", "Short"]
If we put that here we will need to update this article frequently. Ideally our valid value download should also give an idea of what select values are valid for the listing attribute override.
Target Attribute | Note | Example |
Piece 1 garment length | You can find the valid values for attribute on the valid value sheet download | Ankle |
Piece 2 garment length | You can find the valid values for attribute on the valid value sheet download | Below Waist |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Sleeve Length
Sleeve length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 sleeve length | Contact Zentail support for full list of valid values | Cap Sleeve |
Piece 2 sleeve length | Contact Zentail support for full list of valid values | Short Sleeve |
Piece 3
Information about a third piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 95 |
Piece 3 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 3 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 3 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Recycled Spandex |
Piece 3 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 3 apparel type | You can find the valid values for this attribute on the valid value sheet download under Product Type | Trouser |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
Piece 3 garment length | Contact Zentail support for full list of valid values | Above Knee |
Piece 3 sleeve length | Contact Zentail support for full list of valid values | Long Sleeve |
Outerwear Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 10 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 12 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two outerwear vests) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example a snow pant and a snow overall) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | You can find the valid values for attribute on the valid value sheet download | Snow Overall |
Piece 2 apparel type | You can find the valid values for attribute on the valid value sheet download | Snow Pant |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces is the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Pull-On |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Front Full Length Zipper |
**Jacket Length
Jacket Length is a required attribute for this item type. If the jacket length for both pieces is the same then you can just fill out the Jacket Length attribute in Zentail. If they are different then you need to use an override.
Target Attribute | Note | Example |
Piece 1 garment length | You can find the valid values for attribute on the valid value sheet download | Ankle |
Piece 2 garment length | You can find the valid values for attribute on the valid value sheet download | Below Waist |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Sleeve Length
Sleeve length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 sleeve length | Contact Zentail support for full list of valid values | Cap Sleeve |
Piece 2 sleeve length | Contact Zentail support for full list of valid values | Short Sleeve |
Pajama Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 8 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two nightgowns) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example a pajama pant and a pajama t-shirt) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | You can find the valid values for attribute on the valid value sheet download | Pajama Pant |
Piece 2 apparel type | You can find the valid values for attribute on the valid value sheet download | Pajama T-Shirt |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces is the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Fly Zipper |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Front Full Length Zipper |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Garment Length
Garment length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 garment length | Contact Zentail support for full list of valid values | At Calf |
Piece 2 garment length | Contact Zentail support for full list of valid values | Mini |
Sleeve Length
Sleeve length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 sleeve length | Contact Zentail support for full list of valid values | Cap Sleeve |
Piece 2 sleeve length | Contact Zentail support for full list of valid values | Short Sleeve |
Piece 3
Information about a third piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 95 |
Piece 3 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 3 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 3 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Recycled Spandex |
Piece 3 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 3 apparel type | You can find the valid values for this attribute on the valid value sheet download under Product Type | Swaddle Blanket |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
Piece 3 garment length | Contact Zentail support for full list of valid values | Above Knee |
Piece 3 sleeve length | Contact Zentail support for full list of valid values | Long Sleeve |
Piece 4
Information about a fourth piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 4 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 4 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 100 |
Piece 4 apparel type | You can find the valid values for this attribute on the valid value sheet download under Product Type | Circle Skirt |
Piece 4 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 4 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 4 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
Piece 4 garment length | Contact Zentail support for full list of valid values | Above Knee |
Swimwear Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 8 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two rash guards) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example a bikini top and a bikini bottom) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | You can find the valid values for attribute on the valid value sheet download | Bikini Swim Bottom |
Piece 2 apparel type | You can find the valid values for attribute on the valid value sheet download | Bikini Swim Top |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces is the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Pull-On |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Back Drawstring |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Sleeve Length
Sleeve length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 sleeve length | Contact Zentail support for full list of valid values | Cap Sleeve |
Piece 2 sleeve length | Contact Zentail support for full list of valid values | Short Sleeve |
Piece 3
Information about a third piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 95 |
Piece 3 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 3 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
Piece 3 apparel type | You can find the valid values for this attribute on the valid value sheet download under Product Type | Swim Skirt |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
Piece 3 sleeve length | Contact Zentail support for full list of valid values | Long Sleeve |
Top Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 8 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two tank tops) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example a button down shirt and a cardigan sweater) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | You can find the valid values for attribute on the valid value sheet download | Henley Shirt |
Piece 2 apparel type | You can find the valid values for attribute on the valid value sheet download | Sweatshirt |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces are the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Front Button Down |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Pullover |
**Torso Length Style
Torso length style is a required attribute for this item type. If the torso length styles for both pieces are the same then you can just fill out the Torso Length Style attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment length | You can find the valid values for attribute on the valid value sheet download | At Waist |
Piece 2 garment length | You can find the valid values for attribute on the valid value sheet download | At Midriff |
**Sleeve Type
Sleeve type is a required attribute for this item type. If the sleeve types for both pieces are the same then you can just fill out the Sleeve Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 sleeve length | You can find the valid values for attribute on the valid value sheet download | Long Sleeve |
Piece 2 sleeve length | You can find the valid values for attribute on the valid value sheet download | Three Quarter Sleeve |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Piece 3
Information about a third piece of clothing for this item type is not required, however if you would like to send information about it you can use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 95 |
Piece 3 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 3 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 3 |
Piece 3 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Recycled Spandex |
Piece 3 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 3 apparel type | You can find the valid values for this attribute on the valid value sheet download under Product Type | Button Down Shirt |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
Piece 3 garment length | Contact Zentail support for full list of valid values | At Hip |
Piece 3 sleeve length | Contact Zentail support for full list of valid values | Long Sleeve |
Undergarment Sets
**Fabric Type
Fabric Type is a required attribute to be filled out for this item type. If the fabric type of both of the pieces in this set are the same then you only need to fill out this field correctly in order for Zentail to populate all required fields. If the fabric type is different per piece then you need to fill out overrides according to the table below, with the fabric type and percentage entered separately, and the fabrics listed in descending order of frequency per-piece.
Target Attribute | Notes | Example value |
Piece 1 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Cotton |
Piece 1 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 90 |
Piece 1 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 1 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 8 |
Piece 1 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Rayon |
Piece 1 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 2 |
Piece 2 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 2 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 88 |
Piece 2 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 2 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 7 |
Piece 2 apparel material 3 | This should be one of the valid fabric type values (from the valid value sheet) | Spandex |
Piece 2 apparel material 3 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
**Product Type
Product Type is a required attribute for this item type. If the set you are selling is multiples of the same type of clothing (for example two sports bras) then you only need to fill in the Product Type attribute on Zentail with a valid value. If the set is distinct articles of clothing (for example thermal underwear pants and a thermal underwear shirt) then you should use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 apparel type | You can find the valid values for attribute on the valid value sheet download | Thermal Underwear Pants |
Piece 2 apparel type | You can find the valid values for attribute on the valid value sheet download | Thermal Underwear Shirt |
**Closure Type
Closure type is a required attribute for this item type. If the closure types for both pieces are the same then you can just fill out the Closure Type attribute in Zentail. If they are different per-piece then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 garment closure type | You can find the valid values for attribute on the valid value sheet download | Full Waistband Elastic |
Piece 2 garment closure type | You can find the valid values for attribute on the valid value sheet download | Pullover |
**Pattern
Pattern is a required attribute to be filled out for this item type. If both pieces have the same pattern then you can just fill out the Pattern attribute in Zentail. If they have different patterns then you need to use overrides according to the table below.
Target Attribute | Note | Example |
Piece 1 pattern | You can find the valid values for attribute on the valid value sheet download | Dogs |
Piece 2 pattern | You can find the valid values for attribute on the valid value sheet download | Mushrooms |
**Pattern Style
Pattern Style is a required attribute to be filled out for this item type. If both pieces have the same pattern style then you can just fill out the Pattern Style attribute in Zentail. If they have different pattern styles then you need to use overrides according to the table below.
Target Attribute | Notes | Example |
Piece 1 pattern group | You can find the valid values for attribute on the valid value sheet download | Animals |
Piece 2 pattern group | You can find the valid values for attribute on the valid value sheet download | Food |
Garment Length
Garment length is not a required attribute for this item type. If you would like to send this information you can use an override according to the table below.
Target Attribute | Notes | Example |
Piece 1 garment length | Contact Zentail support for full list of valid values | Ankle |
Piece 2 garment length | Contact Zentail support for full list of valid values | Full |
Piece 3
Target Attribute | Notes | Example |
Piece 3 apparel material 1 | This should be one of the valid fabric type values (from the valid value sheet) | Linen |
Piece 3 apparel material 1 percentage | This should be a number that corresponds to the percentage of the above material | 95 |
Piece 3 apparel material 2 | This should be one of the valid fabric type values (from the valid value sheet) | Nylon |
Piece 3 apparel material 2 percentage | This should be a number that corresponds to the percentage of the above material | 5 |
Piece 3 apparel type | You can find the valid values for this attribute on the valid value sheet download under Product Type | Boxer Brief |
Piece 3 garment closure type | You can find the valid values for this attribute on the valid value sheet download under Closure Type | Clasp |
Piece 3 pattern | You can find the valid values for this attribute on the valid value sheet download under Pattern | Plaid |
Piece 3 pattern group | You can find the valid values for this attribute on the valid value sheet download under Pattern Style | Classic Patterns |
Piece 3 garment length | Contact Zentail support for full list of valid values | At Hip |